fbpx

Products

MONO SCREW PRESS

Draining Pressing Line - Continuous Dejuicer

Mono-screw Presses is been planned for the traditional continuous pressing of the destemmed/not destemmed grapes, drained marcs and total drying of the fermented marcs.

models
ENO-PRESS M125 0,75 kW 0,5/0,6 tons 650 mm 1030 mm 1180 mm
ENO-PRESS M170 1,1 kW 1/1,2 tons 700 mm 1114 mm 1235 mm
ENO-PRESS M400 5,5 kW 7/9 tons 880 mm 1850 mm 2660 mm
ENO-PRESS M620 11 kW 12/15 tons 1230 mm 2040 mm 4730 mm
ENO-PRESS M820 22 kW 32/40 tons 1510 mm 2200 mm 6380 mm
ENO-PRESS M1000 37 kW 40/45 tons 1680 mm 2446 mm 6595 mm
ENO-PRESS M125
0,75 kW
0,5/0,6 tons
650 mm
1030 mm
1180 mm
ENO-PRESS M170
1,1 kW
1/1,2 tons
700 mm
1114 mm
1235 mm
ENO-PRESS M400
5,5 kW
7/9 tons
880 mm
1850 mm
2660 mm
ENO-PRESS M620
11 kW
12/15 tons
1230 mm
2040 mm
4730 mm
ENO-PRESS M820
22 kW
32/40 tons
1510 mm
2200 mm
6380 mm
ENO-PRESS M1000
37 kW
40/45 tons
1680 mm
2446 mm
6595 mm

The data reported in the tables are indicative purposes only and may vary depending on the degree of ripeness, the type of grape and the
power mode. The content and the images shown are subject to change without notice.

Legenda
Nome del modello
Potenza del motore
Produzione oraria
Larghezza (mm)
Altezza (mm)
Lunghezza (mm)
Dimensione porta (mm)
Potenza installata - giri
Capacità Tank (L)
Capacità vaschetta mosto (L)
Superficie refrigerante
Adatto per diraspatrici da:
Uva intera (kg)
Uva diraspata (kg)
Vinacce fermentate (kg)
Attacco mandata (mm)
Da abbinare a
Altezza scarico regolabile (mm)
Pressione (bar)
Main features
  • Available in a wide range of models with a production from 0,6 to 45 tons/h.
  • It is made up of AISI 304 stainless steel in all parts in contact with the product.
  • The pressing process takes place in one transit only with the advantage to get maximum results in a short time and minimal employment of manpower.
  • The screw, driven by a strong gearbox, produces the draining action in the first section while in the second one allows full extraction of the juice. Counter-pressure action is made by a frontal plate, pushed by a hydraulic or pneumatic piston.
Options
  • Control panel and Inverter to adjust screw revolution number
  • Crumbler.